Haier HLT364XXQ Manual Del Usuario página 14

" RemoveaJJ pad<ing materials. This includes fhe foam base and aJJ adhesive
tape holding the washer accessories inside and outside.
Open the top lid to remove the styrofoam drum brace. Pull to remove.
Note: Save drum brace. Reinstall when moving the washen
Inspect and remove any remains of packing, tape or printed materials before
using the washer.
BeveH_g Yoo_ W_she_
Your washer has 4 leveling legs; which are located on the four bottom corners.
After properly placing your washer in its final position, you can level your
washer.
Leveling legs can be adiusted by turning them counterclockwise to raise your
washer or turning them clockwise to lower your washen
high _ _ low
Warning: Leveling of washer is very important to prevent vibration durhqg spin.
18