Publicidad
Idiomas disponibles
Idiomas disponibles
Attaching the Legs
7921R / 7921KD-1
fig. 1
1. Locate the seat frame (see fig. 1); place it upside down on a flat, dry surface.
2. Locate the legs (see fig. 2).
3. Attach the legs to the seat frame (see fig. 3). Depress the locking button at the top of each leg
and slide it into the seat frame until the button protrudes from the hole.
4. Repeat step 3 for each leg.
WARNING: Ensure legs are securely installed and all hardware is tight before proceeding.
Attaching the Backrest: (Model 7921R and 7921KD Series Only)
1. Locate the backrest (see fig. 4).
2. Attach the backrest to the seat frame (see fig. 5). Depress the locking buttons and slide the
backrest onto the seat frame until the buttons protrude from the holes.
WARNING: Ensure backrest is securely installed and all hardware is tight before proceeding.
All Models
WARNING: Ensure the Bath Seat is assembled as described. If the Bath Seat is not properly
assembled and installed, personal injury and damage to the Bath Seat could result.
LX_7921KD-INS-LAB-RevD23
7931R / 7931KD-1
fig. 4
fig. 2
fig. 5
www.grahamfield.com
fig. 3
2
Publicidad
