Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
See assembled Bath Seat at right. Contact your GF
distributor immediately if you see any issue with fit,
form, function, or safety. For more information on
GF Health Products, Inc. parts and services, please
contact your GF distributor or www.grahamfield.com.
Adjusting Leg Height
Push in the adjustment button and move to the
desired height position until it clicks into place.
Ensure legs are locked at the same height and
all leg adjustment buttons protrude fully through
adjustment holes.
WARNING: Ensure all Bath Seat components
are secure before each use.
Center of Balance During Use
The point where the Bath Seat will tip forward,
rearward or sideward is determined by its center of
balance and stability, and the center of balance and
stability is affected by the user's body position and
weight distribution. If you fail to heed the following
warnings, falling or tipping may occur and could
cause severe personal injury.
WARNING: To avoid falling or tipping:
Have someone help you until you know the balance points of your Bath Seat and how to
avoid tipping.
Do not put downward weight on one side or corner of the Bath Seat.
Do not put downward weight on the backrest.
Do not reach or lean if you must shift your weight to do so. Ask for help or use a device to
extend your reach.
Never try to reach an object if you must move forward in your seat and your buttocks do
not stay in full contact with the seat.
Never lean backward to reach an object.
MAINTENANCE
WARNING: Check the Bath Seat weekly for signs of damage or cracking. If damage or
cracking of any component of the Bath Seat is found, DO NOT use the Bath Seat. Contact
your Graham-Field distributor.
Inspect the Bath Seat weekly and ensure all components are secure.
To clean the Bath Seat, wash it with soap and water or a mild detergent, then rinse. Ensure the
Bath Seat is rinsed well before use.
LX_7921KD-INS-LAB-RevD23
7921R / 7921KD-1
7931R / 7931KD-1
fig. 6
www.grahamfield.com
3
Publicidad
