Jobe INFINITY SEASCOOTER Manual Del Usuario página 5

The covers of propeller is detachable design
Align the propeller and grilles cap, rotate it clockwise adjust until fitting
sound occur.
How to use
Place the Infinity Scooter into the water. When ready to set o , unlock the Switch first, press and hold both Triggers
to start the propeller. To stop the propeller, simply release the Trigger. Always lock the Switch o when out of the water.
There are 3 speed modes of the Infinity Scooter,always start from 1st level of speed
mode and increase according to convenience.
Hold the Left Trigger and press Right Trigger twice to increase the speed.
Hold the Right Trigger and press Left Trigger twice to decrease the speed.
Proper posture when using the Infinity Scooter is important to achieve the maximum
speed-see figure for the correct position of the Infinity Scooter.
CAUTION
Do not dive deeper than you would normally when snorkeling, to ensure you
can get back to the surface safely.
Charge Battery Pack (for EL-SS02 / EL-SS02S)
CAUTION:
The battery pack can not be charged as the temperature is over 48°C (118°F),
as the temperature drop down, then start to charge.
Do NOT insert the power cord plug if the charge
port, power cord or AC power outlet is wet.