Publicidad
Idiomas disponibles
Idiomas disponibles
1) Pivot capability
;
* The screen enables to rotate 90 degrees. The Pivot Enabled™ monitor which is driven by
Pivot? Software including WinPortrait® and MacPortrait® allows landscape (horizontal) and
portrait (full page vertical) views.
* Pivot Enabled is a trademark of Portrait Displays, Inc.
Pivot? Software, comprised of WinPortrait® and / or MacPortrait? is licensed from Portrait Displays, Inc.
2) Active Matrix-Liquid Crystal Display (AM-LCD) panel
* The 15 inch (15.0" / 38.1 cm Viewable Image Size) 1,024 x 768 pixels (0.297 mm pixel pitch)
AM-LCD panel with anti-glare hard coating give you a low reflection, anti-static, high-resolution
true color (equivalent of 16.19 million color) and high-contrast display.
3) Easy to use digital controls with on-screen menus
* Digital Brightness and Contrast adjustments are directly accessible form the front panel.
* On-screen menus are available in 5 languages: German, French, English, Italian or Spanish.
* Custom adjustments can be made quickly and easily through the icon-based on-screen menu
utilizing five soft touch buttons on the front panel.
* The on-screen icon-based main menu allows scrolling through the icons with the currently
selected icon being identified on the choice bar located at the bottom of the menu.
4) The LC50P is Windows® 95 / 98 Plug & Play compatible
* The LC50P is a Video Electronics Standards Association (VESA?) Display Data Channel
(DDC™) DDC 1 / 2 B compatible monitor which meets the Microsoft® / Intel® Plug & Play
Definition. This allows the LC50P to inform a compatible host using Windows? 95 / 98 of its
capabilities.
5) Environmentally Friendly
+ LC50P typical power consumption is 50% less than that of a Panasonic CRT color monitor.
+ VESA® DPMS™ (Display Power Management Signaling) computers when used with the LC50P
allows further reduction in power consumption. (See Power Management System Page 14.)
* The LC50P conforms to the international ENERGY STAR? program standards.
* Meets MPR II and TCO'92 provisions regarding electromagnetic and electrostatic fields.
* Uses less desk space due to the 7.91" (20 cm) depth.
6) Color Temperature control
* There are three color temperatures that may be selected: Normal, 9300 K or a User Color.
* User Color allows the white balance of an image to be adjusted by individual control of the
Red (R) and Green (G) and Blue (B) levels. This feature enables color matching of the monitor
colors to the output of a color printer. (See Color selection page 12.)
7) PanaFlat digital multi-scan
* Horizontal frequencies of 30 kHz to 61 kHz and vertical frequencies of 50 Hz to 77 Hz separate
sync can be automatically tracked. The LC50P is suited to VGA, SVGA, XGA and VESA®,
timings up to 1,024 (H) x 768 (V) / 75 Hz max. FCC Class B.
+ Sixteen user programmable timing memories in addition to the fifteen factory preset timing
selection (Reservations) for image size and position are provided. (See Memories, Page 14
and Timing Specifications, Page 15.)
* Use of a pixel conversion method enables full-screen display of all modes from 640 x 480 /
60 Hz up to 1,024 x 768 / 75 Hz separate sync. Full-screen display may not be possible
depending on the input signal timing. (See Auto Size, Page 13 & Timing Specifications, Page 15.)
8) Auto Size & Centering
* Based on the input signal, the adjustments for the H. POSITION / H. SIZE, V. POSITION /
V. SIZE in the 640 x 400 to 832 x 624 modes are performed automatically. H. FINETUNE and
V. FINETUNE are adjusted automatically in the 1,024 x 768 mode. Manual adjustment of these
controls may be required when a 1,024 x 768 modes is used or depending on the input timing.
9) Self-test menu
* You can test your LC50P by using the MONITOR-SELF-TEST menu that is displayed on the
screen. This menu will display if any one five front panel control switches is pressed and there
are no pl signals at the input connector of the monitor. (See MONITOR SELF-TEST,
Page 13.
Publicidad
