GE AVM4160 Instrucciones De Instalación página 21

Installation Instructions
- OUTSIDE BACK EXHAUST
{Horizontal Duct)
INSTALLATION OVERVIEW
Cl. Prepare Rear Wall
02. Attach Mounting Plate to Wall
03. Prepare Top Cabinet
C4. Adjust Blower
05. Mount the Microwave Oven
PREPARING THE REAR WALL
FOR OUTSIDE BACK EXHAUST
You need to cut an openinginthe rear wallforoutside
exhaust,
• Read the instructions on the REAR WALL TEMPLATE,
• Tape it to the rear wall, lining up with the holes
previously drilled for holes A and B in the mounting
plate,
• Cut the opening, following the instructions of the
REARWALL TEMPLATE,
[_ ATTACH THE MOUNTING PLATE
TO THE WALL
! __ii _i_ i i
: i ........... - _ iii/ i i
Attach the plate to the wall using toggle bolts, At least
one wood screw must be used to attach the plate to
a wall stud,
_!] Remove the toggle wings from the bolts,
[]Insert the bolts into the mounting plate through
the holes designated to go into drywall and reattach
the toggle wings to ¾" onto each bolt,
21