Publicidad
Idiomas disponibles
Idiomas disponibles
2 adjacent furniture doors can be attached
instead of
one large door. These furniture doors must be
connected
to a metal strip on the rear.
This metal strip can be purchased
from customer
service as an optional accessory,
see the section on
"Optional accessories"
on page 11.
17. Attaching
the adjusting
rail
to the furniture
door
(refrigerator
compartment)
[_The
adjusting
rail is the most important
means of
adjusting
the furniture front.
When attaching
the metal strip to the furniture doors,
observe the maximum
possible length of the screws and
the position of the drill holes. Always screw into the best
toad bearing material of the furniture door.
[_lf
only one furniture door is to be attached
to the
door of a 30" or 36" wide appliance,
attach the
supplied
sandwich
plate to the adjusting
rail and
lock into position.
16. Loading the appliance
door
When attaching
the furniture doors, it is recommended
to toad the door storage compartments
in the appliance
with weights
in order to ensure that the gap width is as
precise as possible.
Recommendations:
Refrigerator
compartment
Freezer compartment
26 tbs / 12 kg (per door)
22 tbs / 10 kg
Unscrew the installation
support
part from the
appliance
doors.
CI
Remove the cover plate from the freezer
compartment
door.
[_
Check the double threaded
bolts on the adjusting
rail. Both of them must project out of the door by
3/1¢" (5 mm).
22
Publicidad
