Publicidad
Idiomas disponibles
Idiomas disponibles
[_
Note
Attach the adjusting rail to the furniture door with at
least 6 screws. One screw should be inserted under
each double threaded
bolt.
4,
,!,
C)
Measure the distance X between the adjusting
rail
and the overhead
furniture/fixtures.
4x15
The adjusting
rail features a variety of holes for the
many different design options of furniture doors.
Always screw into the best toad bearing material
of the furniture door.
18. Attaching
and aligning
the furniture
door
(refrigerator
compartment)
[_The
double threaded
bolts are responsible
for
adjusting the height of the furniture front.
[3
Hang the furniture door on the double threaded
bolt.
C)
Mark this amount X on the rear of the furniture door.
C_ Determine
and mark the centre of the furniture door.
[3
Loosen the 2 nuts and remove the adjusting
rail.
[3
Put on the adjusting
rail and align along the marks.
Mark the drill holes.
_3
Drill the holes.
[3
Screw on the adjusting
rail tightly.
_3
Align the furniture door with the double threaded
bolts (Torx screwdriver).
23
Publicidad
