Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
4
Installing the stub-out pipe
Install stub-out pipe (not included) for the spout.
Use proper length stub-out pipe so pipe threads
will extend 3-3/4 to 4-1/8 inches beyond the
finished wall.
In order to assure proper function, piping from the
bottom port of the valve-to-tub spout outlet MUST
be either 1/2 in. normal copper pipe or 1/2 in. iron
pipe. If PEX is used for the tub spout, the PEX must
be more than 1/2 in.
Apply sealant tape (G) on all threads.
6
Installing the tub spout
Apply sealant tape (G) on the pipe thread.
Install the tub spout (F) onto the pipe by turning
the tub spout (F) in a clockwise direction.
5
Installing the shower
Wrap the thread on the shower arm (B) with
selant tape (G).
Install the shower arm (B) and shower arm flange
(I) to the vertical shower pipe elbow.
Install the shower head (A) to the shower arm (B).
B
G
A
F
6
I
G
G
Publicidad
