Intellinet Network Solutions IPS-08G-95W Instrucciones página 2

The Intellinet 8-Port Gigabit Ethernet PoE+ Switch with PoE Passthrough offers
an array of time-saving, cost-effective features while providing superior network
throughput. No configuration is required and installation is plug and play.
Features
• Supports up to 95 W power input from a PoE injector or switch (port 8)
• Provides up to seven PoE network devices with power and data (ports 1 – 7)
• Doubles the connection distance between PoE source and device from 100 m (328 ft.) to 200 m (656 ft.)
• Powered via PoE, DC power adapter or industrial power supply (not included)
• Two redundant DC inputs (48 – 57 V) with I/O terminal block
With a backplane speed of 16 Gbps, plenty of performance is available for your computers, servers
and other networking devices. Each of the ports automatically senses the link speed of the connected
network device and adjusts to 10, 100 or 1000 Mbps for compatibility and maximum performance.
This PoE switch is designed to provide compatible devices with enough power when needed.
It offers up to 30 watts of power per port until its power budget of 120 watts is reached.
For specifications, visit intellinet-network.com. Register your product at register.
intellinet-network.com/r/561624 or scan the QR code on the cover.
Front Panel
DIP Switch — VLAN
OFF : default mode; allows normal communication between ports 1 – 8.
ON : isolates ports 1 – 7 from each other but allows them to connect to port
2 English
INT_561624_QIG_0923_REV_5.11.indd 2
LED Color Status
On
PWR Green
O
On
10/100M/1000M
Green Blinking
O
On
PoE
Orange Blinking
O
8; increases the forwarding rate when broadcast storms occur.
Status Description
Power on
Power o
Valid port connection
Sending or receiving data
No link established
The connected device is receiving power
Abnormal power supply
No powered device (PD) connected
Instructions
9/21/23 9:27 PM