Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT INSTALLATION
BEFORE INSTALLATION
IMPORTANT
Please be advised that the provided
T-Valve should be installed at the Fill Valve
under the toilet tank, and NOT at the cold
water supply coming from the wall .
If you do not have access to the Fill Valve
under the toilet tank, contact Brondell
Customer Service at 888 .542 .3355 .
We may be able to provide alternative
options .
Check Water Supply Line
Check the water supply line that connects the toilet tank fill valve to the water shut-
off valve at the wall . If it is a rigid pipe, you will need to purchase a flexible water
supply hose to replace it before installing the SimpleSpa . The length of the hose you
purchase may vary, but the top connection size should be 7/8" Ballcock (to connect to
the T-valve that you will install under the toilet tank), and the bottom connection will be
3/8" or ½" female compression (to connect at the shut-off valve at the wall) .
INSTALLING THE BIDET ATTACHMENT
1 . Remove the existing toilet seat .
a . Lift hinge covers and use flathead or Phillips
head screwdriver to remove the mounting bolts .
Alternatively, you may need to loosen mounting
bolts underneath the seat .
b . Remove the toilet seat and set the seat,
mounting bolts, and hardware aside .
Step 1b
5
Publicidad
