Sling Attachment; Safety Precautions - Joerns Oxford 4-Point Adaptive Power Cradle Manual Del Usuario

Oxford
®
Adaptive Power Cradle

4. Sling Attachment

Attachment of the Comfort sling to your Adaptive Power Cradle:
The Comfort sling attaches to the cradle studs via the Securi3 safety clip system (shown below);
each sling is supplied with instructions. Please study the instruction guide before use (See fig. 8).
Example of Securi3 safety clip system. The 3 key stages assure patient and carer of complete
safety and comfort throughout the transfer (see fig. 9).

5. Safety Precautions

1. Attach clip to lug
2. Pull plastic clip down to secure
3. Feed green 'safe' tab through slot
4. Sling is attached and ready to use
• Before using your 4-point Adaptive Power Cradle ensure the quick release pin is
FULLY ENgAgED as shown in figure 6 and 7 on page 5.
• The Oxford 6-point spreader bar and the Oxford 4-point Adaptive Power Cradle
(power and non-power) are only compatible with the Oxford Presence and Stature
lifts. Do not use this cradle or spreader bar with any other manufacturer's lift or
slings.
6
1. 2.
WARNINg!
Fig. 8
3. 4.
Fig. 9
English