5. Safety notes
All instructions marked with this symbol are special safety
instructions.
The pressure regulators conform to the latest technological standards as well as the
requirements of existing regulations.
No modifications or conversions are permitted without
permission from the manufacturer.
It is not permitted to insert adapters between the gas cylinder
valve and cylinder pressure regulator.
Incorrect and improper usage could result in danger to the
user and other persons, as well as damage to the pressure
regulator and the system.
Always wear protective goggles and gloves when working with the device.
6. Designation in accordance with DIN EN ISO 2503
7. Commissioning
Read the information in these instructions for use before working with the device and
observe the information during work!
A (rear)
• Gas type
• P1
• P2
• Date of manufacture
B (front nameplate)
• Name/manufacturer's mark