Publicidad
Idiomas disponibles
Idiomas disponibles
1. Turn gas off at the control knobs and propane tank.
2. Disconnect LP-Gas cylinder from hose and regulator.
3. Remove warming rack, cooking grates, and heat tents.
4. Detach burner by removing the cotter pins at the back of the burners to detach them from
the brackets.
5. Detach ignition wire from electrode by hand only. DO NOT use pliers or any other tool as it
may damage the electrode or wire.
6. Lift burner slowly.
7. Ensure all burner ports are clear of clogs. Use of a pin or paper clip works well.
8. Ensure burner is free from any damage. If damage is found, replace with new burner.
9. Ensurer the end of the burner and primary air screen are clear of insect nests, dirt, or debris.
24
Publicidad
