Mitsubishi Electric Mr.SLIM PUZ-ZM YKA2 Serie Manual De Instalación página 8

2. Installation location
2.4.2. When installing a single outdoor unit
Minimum dimensions are as follows, except for Max., meaning Maximum dimen-
sions, indicated.
Refer to the figures for each case.
1 Obstacles at rear only (Fig. 2-7)
2 Obstacles at rear and above only (Fig. 2-8)
3 Obstacles at rear and sides only (Fig. 2-9)
4 Obstacles at front only (Fig. 2-10)
* When using the optional air outlet guides, the clearance is 500 mm or more.
5 Obstacles at front and rear only (Fig. 2-11)
* When using the optional air outlet guides, the clearance is 500 mm or more.
6 Obstacles at rear, sides, and above only (Fig. 2-12)
• Do not install the optional air outlet guides for upward airflow.
en
Fig. 2-7
Fig. 2-11
Fig. 2-14
Fig. 2-17
6
2.4.3. When installing multiple outdoor units
Leave 50 mm space or more between the units.
1 Obstacles at rear only (Fig. 2-13)
2 Obstacles at rear and above only (Fig. 2-14)
• No more than 3 units must be installed side by side. In addition, leave space as shown.
• Do not install the optional air outlet guides for upward airflow.
3 Obstacles at front only (Fig. 2-15)
* When using the optional air outlet guides, the clearance is 1000 mm or more.
4 Obstacles at front and rear only (Fig. 2-16)
* When using the optional air outlet guides, the clearance is 1000 mm or more.
5 Single parallel unit arrangement (Fig. 2-17)
* When using the optional air outlet guides installed for upward airflow, the clearance is 1000
mm or more.
6 Multiple parallel unit arrangement (Fig. 2-18)
* When using the optional air outlet guides installed for upward airflow, the clearance is 1500
mm or more.
7 Stacked unit arrangement (Fig. 2-19)
• The units can be stacked up to 2 units high.
• No more than 2 stacked units must be installed side by side. In addition, leave space as
shown.
Fig. 2-8
Fig. 2-12
Fig. 2-15
Fig. 2-18
Fig. 2-9
(mm)
Fig. 2-10
Fig. 2-13
Fig. 2-16
Fig. 2-19