ASSEMBLY INSTRUCTIONS
13. Insert and snap lock the LEFT HAND to the
left ARM POLE.
(Match M to M)
14. Secure hook and loop from the sleeve over top
of the LEFT HAND.
15. Adjust the fabric to lay flat over the item and the
METAL BASE.
Position the item with the human sensor pointing
forward and not covered.
13
14
15
9
ASSEMBLY INSTRUCTIONS
16. Check that the 5.9V 3A ADAPTER located on the
CONTROL BOX is fully secure by twisting it tight.
OR
Unscrew to unplug the 5.9V 3A ADAPTER and
insert 4 AA BATTERIES (included) into the
battery compartment located on the
CONTROL BOX.
17. Move the switch to the ON position. Move in front
of the item or make a loud sound (clap) to activate
the item. Move the switch to the HUMAN ONLY
position to activate the item with motion only.
Turn the item to the OFF (DEMO) position when
not in use.
OPTIONAL DEMO AND EXTERNAL SPEAKER SET UP
OPTIONAL DEMO SET UP
FOOTPAD IS NOT INCLUDED. MUST BE PURCHASED SEPARATELY.
1. Insert the cable from optional footpad into the
jack labeled DEMO JACK on the CONTROL BOX.
2. Place the switch in the DEMO position to enable
DEMO activation.
3. Step on the footpad or press the external trigger to activate the
scary sequence!
OPTIONAL EXTERNAL SPEAKER SET UP
EXTERNAL SPEAKER IS NOT INCLUDED.
MUST BE PURCHASED SEPARATELY.
1. Plug speaker cord into the jack labeled SPEAKER JACK
located on the CONTROL BOX.
2. Use volume knob on external speaker to control volume levels.
16
17
10