Publicidad
Idiomas disponibles
Idiomas disponibles
Connection
Watching TV
VHF/UHF Antenna
or
Cable TV
or
F-Type
Antenna
Adapter
CableCARD™
S-Video
OUT
ANT IN
Video
ANT OUT
OUT
L
Audio
OUT
R
Video
Video recorder
IN
with TV Tuner
L
DVD Recorder /
Audio
VCR
IN
R
Note
•
All cables and external equipment shown in this book are not supplied with the TV.
•
For additional assistance, visit us at : www.panasonic.com
www.panasonic.ca
•
The S-Video input will override the composite video signal when S-Video cable is connected.
Connect either S-Video cable or Video cable.
•
When receiving digital channel signals, all digital formats are down-converted to composite NTSC video to be
output through the PROG.OUT terminals.
•
Some programs contain a copyright protection signal to prevent VCR recording.
•
When the copyright protection program is displayed, do not connect the other TV monitor through a VCR. Video
signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the
other TV monitor.
•
Set the TV channel to CH3 or CH4 for using Cable Box Connection.
8
All manuals and user guides at all-guides.com
(Continued)
Back of the unit
AC cord
(Connect after all the
other connections.)
S-Video signals have
priority.
To record TV shows
Fixing connection cables and AC cord
Example of "connection cable routing"
Fastener
•
To unfasten
Cable clamper
Attaching the cable clampers
(Pedestal accessory)
Snap open
Snap shut
CableCARD
TM
Consult your cable company on the availability of CableCARD
1. Connect the cable antenna to ANT connector.
2. Turn the TV on (see page 15).
3. Set the input mode to TV (see page 26).
4. Insert the CableCARD
it will go into the CableCARD
Follow the messages displayed on the screen.
Note
•
If you experience front panel control or remote control function hang-up when using CableCARD
TV and plug it back on and try the controls again. If this condition persists, please call Panasonic Customer Call
Center for further instructions.
•
Do not insert a PCMCIA card into CableCARD
Cable Binding Instructions
Connect power plug to
the socket of the main
body.
Fix the AC cord in
Cable clamper.
AC cord
•
Do not bundle the RF cable and AC cord together (could
Remove from the TV unit
cause distorted image).
•
Fix cables with Cable clampers as necessary.
•
Push both side
When using the optional accessory, follow the option's
hooks and pull out
assembly manual to fix cables.
TM
CableCARD
Connection
allows you to tune digital and high definition cable channels through the cable antenna.
TM
(with upper side facing you) as far as
TM
slot on the back of the TV.
Upper side of the card facing you
(
The CableCARD
depending on the manufacturer.
TM
slot.
How to fix:
Fix by pushing
in until a clicking
sound is heard.
How to release:
Pull up while
drawing the knob.
TM
.
Back of the TV
Insert mark (e.g.)
TM
)
design varies
TM
, unplug the
Publicidad
