Publicidad
Idiomas disponibles
Idiomas disponibles
USING THE CONTROL PANEL
1 /
Overview of control panel
Temperature display
and error codes
Heating mode
Auto mode
Cooling mode
On / Off
2 /
Button functions and usage
Power on (start up) and power off (shut down) button.
When switching on the POOLICAN, the green light is displayed; we recommend to leaving the
POOLICAN switched on throughout the season so it can automatically manage your pool water.
If Wifi is connected, the Wifi light will turn green.
If the unit of temperature is degrees Celsius, this light will turn green.
Filtration start up button. When starting up the filtration system, it will run for a set amount
of time (parameter C8, by default 8h) every 24h (ensure that the POOLICAN is plugged in and
switched on). However, this is the minimum amount of run time, and due to the heat pump
requiring more time to reach and maintain its target temperature, the circulation pump will
also run continuously during this time. When the heat pump is off, the preset filtration time
will be used.
Salt chlorinator start up button. Pressing this button will cycle through the modes .
1st press = BOOST, 2nd press = ON (normal), and 3rd press = OFF, then the cycle repeats .
When starting up the water treatment system in BOOST mode, chlorine production (at 5 g/h)
will begin for a set amount of time (parameter C9, by default 8h) every 24h. At the end of the
BOOST, POOLICAN will return to normal mode.
When starting up the water treatment system in normal mode, chlorine production (at 2.5
g/h) will begin for a set amount of time (parameter C9, by default 8h) every 24h. POOLICAN
will repeat this cycle every day.
Button for switching to heating / cooling / auto mode.
The POOLICAN heat pump has 3 operating modes which can be selected using the specific
hot and cold buttons (their respective lights will turn green depending on the selected mode);
to switch to automatic mode, simply press and hold both buttons (hot + cold) for 3 seconds,
both lights will turn green.
Temperature adjustment button (in 1°C increments) available after selecting the desired
mode. To unlock, press the adjustment buttons for 5s. Poolican will beep and the lock indica-
tor will go out.
Lock status
Active defrosting mode
Unit of temperature
Water treatment:
Normal or BOOST
mode
Wifi
Filtration
T° +/- adjustment
& lock function
EN
| 17
Publicidad
