Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT INSTALLATION
Before Installation
Do not plug the product in while the unit is upside down.
This may cause damage to the internal components.
Watch our installation video
Installation for all Swash products can be
found online at brondell.com
Check bolt spread
This bidet seat can only be installed on
toilets with a bolt hole spread of 5.3–7.7 in.
(see Product Dimensions on page 8 for
more information).
Check for a concealed toilet fill valve
Many modern toilets have sleek designs
intended to cover and camouflage
plumbing connections, which make a
standard Swash installation difficult or
impossible. For this, we recommend using
our Alternate Swash Bidet Seat T-Valve,
found on brondell.com.
Check water supply line
Check the line that connects the toilet tank
to the water shut off valve. If it is a rigid
pipe, you may need to purchase a flexible
hose to replace it before installing the
Swash. The length of the hose and the size
of the connectors will vary.
CAUTION
Residual moisture is normal
Every product is tested with pure water
during production to ensure the highest
quality and performance. It is normal to
find a small amount of residual moisture on
the product.
Tools
A Phillips head or standard screwdriver may
be needed to remove the existing toilet
seat and a standard wrench may be needed
for tight water supply connections. Teflon
tape can be helpful in creating a water-tight
seal between plumbing connections.
11
Publicidad
