brondell Swash Eco Thinline T66 Manual Del Propietário página 13

PRODUCT INSTALLATION
Swash Installation (Cont'd)
5. Installing mounting plate
a. Wet the rubber anchors with water,
squeeze the sides of the anchors, and
firmly press them all the way down into
the mounting holes on top of the toilet.
TIP: Wetting the rubber anchors will
allow for easier installation. The top of
the anchors should be flat to the surface.
Step 5a
b. Place the mounting plate over the
rubber anchors on the toilet.
c. Place the adjustable brackets flat side
down on the mounting plate over the
rubber anchors.
d. Insert the washers and metal mounting
bolts through the adjustable brackets
and rubber anchors; use a Phillips
screwdriver to screw in the mounting
bolts and tighten.
Steps 5b–5d
6. Insert the deodorizer cartridge into the
back of the bidet body and attach the
deodorizer cover until it snaps into place.
Step 6
Continued following page
13