Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT INSTALLATION
External Bidet Filter Installation
NOTE: Customers with hard water,
well water, and softened water can
extend the life of their bidet seat by
purchasing and installing an external
inline water filter to be used with the
bidet seat. The bidet filter should be
changed every 6 months and can be
purchased online at brondell.com.
1. Turn off water supply valve and flush
toilet
a. Turn water valve off to stop the flow
of water.
b. Flush toilet and hold down handle to
completely empty tank.
2. Disconnect the bidet hose from the
T-Valve
Step 2
3. Connect the female end of the Swash
filter to the open T-Valve connection
Step 3
4. Connect the bidet hose to the male
end of the Swash filter
Step 4
5. Turn the toilet water supply valve
back on
FLOW
(optional, not included)
FLOW
15
Publicidad
