brondell Swash Eco Thinline T66 Manual Del Propietário página 21

PRODUCT OPERATION
Special Mode Operation: Memory Functions
User Memory Settings
The Swash User 1 and User 2 memory
functions allow you to program your
preferred wash settings for rear, front, or
strong wash cycles for two users. These
settings include nozzle positioning,
water pressure, water temperature, seat
temperature, and move function. Follow the
steps below to program and use the memory
function.
Programming User 1 Memory Function
1. Sit on the seat and select your wash
cycle (rear, front, strong). Adjust the
nozzle position, water pressure, water
temperature, seat temperature, and/
or activate move function, to your
preference.
2. Press the Stop button.
3. Press User 1 for 2 seconds. A beep will
occur, and the yellow Deodorize LED
light on the remote will blink to confirm
programming is complete.
4. Repeat instructions for the next wash
cycle you want to program.
Programming User 2 Memory Function
1. Sit on the seat and select your wash
cycle (rear, front, strong). Adjust the
nozzle position, water pressure, water
temperature, seat temperature, and/
or activate move function, to your
preference.
2. Press the Stop button.
3. Press User 2 for 2 seconds. A beep will
occur, and the yellow Deodorize LED
button on the remote will blink to confirm
the programming is complete.
4. Repeat instructions for the next wash
cycle you want to program.
Using User 1 and User 2 Memory Function
1. Sit on the seat and select User 1 or
User 2. The deodorize LED light will
flash alerting you that user memory is
activated.
2. Press Rear, Front, or Strong Wash
button depending on which cycle was
programmed.
3. The preset nozzle positioning, water
pressure, water temperature, seat
temperature, and move function (if
selected) will be activated.
4. To stop user preset wash before the cycle
ends, press Stop.
5. To exit user preset, press the same user
button again and the deodorize LED
light will turn off. This will revert to the
previous settings.
NOTE: After leaving the seat without
manually exiting, the seat will
automatically revert to the previous
settings.
21