Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
Mesh Filter and Carbon Deodorizer Cartridge
Cleaning the mesh filter
Cleaning intervals will differ depending on use
and water quality. It is recommended to check
the filter at least once per year.
1. Turn off the water supply and hold the
toilet flush lever down until all water has
drained from the tank.
2. Unplug the bidet seat, remove from the
toilet, and disconnect the bidet hose. You
may want to use a bucket to catch any
dripping water from the bidet hose.
3. Remove the mesh filter from the water
inlet with a pair of tweezers or needle-
Step 3
nosed pliers.
4. Clean the filter with a toothbrush while
running it under tap water to effectively
remove any foreign substances or build-
up.
5. Replace the mesh filter and carefully
check that it is installed correctly.
Improper installation may result in the
product leaking water.
6. Reconnect the bidet hose and place the
seat back onto the toilet. Plug the cord
back in and turn the water supply back on.
Replacing the carbon deodorizer cartridge
We recommend replacing the carbon
deodorizer cartridge every 6 months.
Replacements are available for purchase at
brondell.com.
1. Locate the deodorizer compartment.
When facing the toilet, the compartment
is located at the rear, right-hand side of
the unit.
2. Remove the bidet seat from the toilet by
pressing the quick-release button on the
right side of the bidet seat.
3. Remove the compartment cover by
pulling on the plastic tab.
4. Pull out the old deodorizer cartridge
from the compartment and replace it
with the new cartridge.
5. Replace the compartment cover back
onto the bidet seat. Replace the seat
onto the toilet.
27
Publicidad
