Display Panel Operation - BH Emotion EVO Manual Usuario

ATOM

Display Panel Operation

The display panel provides the following operations and information screens:
1. Installation of the Fixed or Removable Display Panel.
The remote control can either be made fixed or removable, depending on the needs of the user, by simply
inserting or removing an M3 screw, as shown in the image.
By default, the remote control will be fixed with the screw.
NOTE
Here are the steps to remove the remote control after removing the screw; follow the instructions below:
1. The user pushes the flap beneath the remote control.
2. W hile holding down the flap, the user slides the panel upwards to fully remove it.
3. The panel is released.
2. Switching the Pedal Assistance System on and off.
The pedal assistance system is turned on by holding down the POWER button for 3 seconds.
The pedal assistance system is turned off by holding down the POWER button again for 3 seconds.
The bicycle can be used normally without any type of assistance.
3 sec
In order to reduce risk of theft, to remove (or insert) the panel screw,
the user must first loosen the grips, left brake lever, shift lever and the panel
support bracket.
1
USER MANUAL
3
2
EN
35