EN
USER MANUAL
Motor Maintenance
Because the motor is a precision machine, do not disassemble it or exert excessive force on it (e.g. do NOT hit
this product with a hammer).
Storage
Keep the bicycle in a place that is:
•
Flat and stable
•
Well ventilated and dry
•
Protected from the elements and direct sunlight
Prolonged Storage
If you are going to store the bicycle for a prolonged period (1 month or more), remove the battery and store
it as follows.
•
Make sure that the remaining battery capacity is above 50% and then store it indoors, in a cool
(10 to 20°C) and dry place.
•
Check the remaining battery capacity once a month, as the battery is slowly discharged while
in storage. If the capacity is below 50%, charge it until it is above 50%.
•
When using it again after a prolonged period of storage, be sure to charge the battery before use.
TECHNICAL SPECIFICATIONS
Motor
•
Direct Current Brose Motor.
•
250 W power.
•
Maximum assistance speed 25 km/h.
•
System voltage: 36 V.
Battery
•
Lithium-ion battery.
•
Battery voltage: 36 V.
•
Capacity: 500 Wh or 600 Wh (depending on version).
Central Display Panel
•
USB type: USB 2.0.
•
Output current; max. 1,000 mA.
FAQs
What is the maximum speed of this bicycle?
It depends on the user. There is no maximum speed. However, at speeds over 25 km/h, the pedal assistance
provided by the motor is disabled. This restriction on assistance is a legal requirement for pedal-assist bicycles,
according to European regulation EN 15194.
48
ATOM