Publicidad
Idiomas disponibles
Idiomas disponibles
SETUP
1.
Remove frame, commode platform and back support from box.
Unwrap all packaging materials.
2.
Commode platform is already attached to frame, as shown below;
ensure that all sides of platform are secured to frame.
3.
The commode comes in its lowest position. Adjusting to desired height
is recommended before use.
ARM ADJUSTMENT
•
Drop Armrest: to drop the armrest, push the release lever inwards to
release the armrest. This releases the armrest allowing for the transfer
on and off the commode.
•
Raise Armrest: to raise the armrest, lift the armrest to the upright
position, ensuring that the push button protrudes fully from locking hole.
ADJUSTING LEG HEIGHT
1.
Depress the height adjustment button and slide the lower leg upward
or downward until the height adjustment button is fully engaged in the
desired hole.
NOTE: An audible "click" will be heard.
2.
Repeat for other 3 legs.
CAUTION: Ensure that all four commode legs are adjusted to the
same height, and that all height adjustment buttons protrude fully
through adjustment holes before use.
(6438A ONLY)
Publicidad
