Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION - DANGER OF INJURY!
Never point the spray gun at yourself, at other people or at animals.
When working with the tool indoors as well as outdoors ensure that no solvent vapors
are sucked in by the spray gun.
When working outdoors, be aware of the wind direction. Wind can carry the coating
substance across greater distances - thus causing damage. When working indoors,
provide for adequate ventilation.
Do not let children handle the device.
Never open the device yourself in order to carry out repairs in the electrical system!
Do not lay the spray gun.
Residual risks
Even when the power tool is used as prescribed it is not possible to eliminate
all residual risk factors. The following hazards may arise in connection with
the power tool's construction and design:
Damage to lungs if an effective dust mask is not worn.
Damage to hearing if effective hearing protection is not worn.
Damages to health resulting from vibration emission if the power tool is being used
over longer period of time or not adequately managed and properly maintained.
passive medical implants. To reduce the risk of serious or fatal injury, we
recommend persons with medical implants to consult their physician and the
medical implant manufacturer before operating this machine.
6
Max. viscosity
Rated voltage
Rated input power
Double insulation
Container capacity
Flow rate
Nozzle size
Φ1.8 mm
Φ2.6 mm
Sound pressure level LPA
Sound power level LWA
Vibration emission
Wear hearing protection while operating the power tool.
The declared vibration total value has been measured in accordance with a standard
test method and may be used for comparing one tool with another.
The declared vibration total value may also be used in a preliminary assessment of
exposure.
WARNING
The vibration emission during actual use of the power tool can differ from the declared
total value depending on the ways in which the tool is used.
There is the need to identify safety measures to protect the operator that are based on
an estimation of exposure in the actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is switched off and when it is
running idle in addition to the trigger time).
Safety
Instructions
JS-HH12B
100 DIN-s
220-240V~
500W
回
800mL
Flow rate
330ml/min
900ml/min
82.17dB(A)
K=3dB(A)
93.17dB(A)
K=3dB(A)
<2.5 m/s2, K=1.5 m/s2
7
Publicidad
