1.5.5 Installation and loading sequence for carri-
er units
WARNING
Only assemble the roof rack modules -B- on the carrier
units once the carrier units -A- have been fitted to rail B
on the vehicle – risk of accident!
1.5.6 Rear lid opening range
Caution
To prevent damage to the vehicle, make sure that the rear
lid is opened carefully after longer objects have been loa-
ded onto the vehicle. For vehicles featuring automatic rear
lid operation, it is recommended that you adjust the open-
⇒ Vehicle Owner's Manual.
ing angle as required
1.5.7 Opening area of the sliding/tilting sunroof
and tilting panoramic roof
Caution
Roof rack modules (such as a roof box or bicycle rack)
must be securely fastened in the T groove on vehicles with
a sliding/tilting sunroof or tilting panoramic roof.
The clearance above the sliding/tilting sunroof or tilting
panoramic roof must be checked when installing the carrier
units. If the roof rack modules are secured using assembly
brackets, the sliding/tilting sunroof or tilting panoramic
roof must not be opened – risk of damage resulting from a
collision!
Installation instructions - Audi A6 (4G) Avant 2012 ►
Edition 01
1 Notes
5