Publicidad
Idiomas disponibles
Idiomas disponibles
2.3 CHANGING THE LIGHT
(OPTIONAL)
Any replacement or maintenance
of the LED lamps is intended to
be made by the manufacturer, its
service agent or similar qualified
person.
IMPORTANT:
Above is only for reference. The actual
configuration will depend on the physical
product or statement by the distributor
2.4 START TO USE
•
Open the cover plate from the
side with the tool.
•
Open the cover plate, take out the
power cord, and then cover the
cover plate.
LGUM-100-05新平台电控冷柜.indd 12
•
After transportation, please let the
freezer stay for more than 2 hours
before turning on the power,
otherwise it will lead to a decrease
in cooling capacity or a damage
to the freezer.
•
The freezer shall run 2 to 3 hours
before loading fresh or frozen
foods; the freezer shall run for
more than 4 hours in summer
in advance considering that the
ambient temperature is high.
•
Please pull out the plug in case
of power failure or cleaning.
Do not connect the freezer to
power supply within five minutes
to prevent damages to the
compressor due to successive
starts.
EN-10
2021-8-24 14:42:42
Publicidad
