Publicidad
LATCH 5 FINGERPRINT
Smart Fingerprint Lock
User Guide
V1.0
Ultraloq Terms & Policies
Before using all Ultraloq products, please read all applicable terms, rules, policies and usage
provisions found at www.u-tec.com/company/privacy. By using your Ultraloq, you agree to
be bound by the U-tec Privacy Policy.
1
Add Lock to U-tec App
U-Tec
Search on app store
1
Download App
2
Create Account
3
3
Operate the Lock
1
Unlock with Fingerprint
2a.
Touch the center of the touch screen
with registered Fingerprint.
Unlock with Code
2
1a.
Touch the lock with the
1b.
Enter the 4-8 digit code and
back of your hand to
press the
activate the lock.
turn green if the code is correct.
Unlock with App
3
Set up devices
Device
Unlocked
3a.
Connect the lock with U-tec App
and tap the Unlock button.
Exterior
Low battery
Communication
-
0
9
Back
LED Indicator
Shows you authorized or denied access.
Touchscreen
Used to enter the code and unlock from the outside.
Fingerprint Reader
Read Fingerprint signals and unlock from the outside.
Need help?
To get help or learn more
Backup Key Hole
https://support.u-tec.com
Used to insert the key to unlock from outside.
CREAT AN ACCOUNT
LOGIN MY Latch 5 Fingerprint
U-tec account is used on U-tec App,
Username
Website, Store, Ultraloq App,
Camguardian App.
Password
Email
Remember me
First Name
LOGIN
Last Name
Forgot password?
Password
I have't U-tec account, creat now.
Confirm Password
I agree with the Terms of service
SIGN UP
I have a U-tec account, login now.
2b.
Turn down the handle to open the door.
1c.
Turn down the handle to
open the door.
, the LED will
3b.
Turn down the handle to open the door.
Numbers
Enter
2
Add a New Device and
Add the lock to the App through two options.
1
Bluetooth and GPS should be turned on in your
smart phone to enable this feature.
Overall Process for Adding a New User
2
Device List
Front Door
Latch 5 Fingerprint
Device List
4
FAQ
1.Can't Unlock by inside handle after installation. How to Fix?
Q
A
Please check the thickness of your door. The thickness should be between 1-3/8'' to 1-3/4"(35 mm - 44mm).
Please install the spring if the door thickness is over 1.65"(42mm). Don't forget plug in the spindle. For thicker
doors between 2'' to 2-3/4"(51mm -70mm), please order the Ultraloq Thick Door Kit on our official online
store. https://support.u-tec.com
2.How to reset the Latch 5 Fingerprint?
Q
A
Please note all data will be erased if you reset Latch 5 Fingerprint to factory default settings. If you are using
the U-tec App as Owner, please click "Delete and Reset" to remove the lock from your U-tec Account, then
use the Reset Needle to push the Reset Button (above the batteries in the Interior Assembly) until you hear
one long beep and two short beeps.
3.What if I lost the paired smartphone?
Q
A
Please go to www.u-tec.com/myutec.html or login U-tec App via another smartphone to change your U-tec
account password.
4.How can I unlock the Latch 5 Fingerprint if the battery runs out?
Q
A
The low battery indicator light will be red when the batteries are gonging to be running out. The backup
mechanical keys work always even when the batteries go dead.
5.What is the log capacity for the Latch 5 Fingerprint?
Q
A
Latch 5 Fingerprint supports maximum 1000 logs. The latest log will replace the oldest one once the log is full.
6.Does the Latch 5 Fingerprint work with accessories such as latch from third
Q
Q
parties?
A
It is recommended to use the original accessories for best performance and stability.
If you come to any other questions, please don't hesitate to visit our official support website
https://support.u-tec.com to get more help.
Interior
LED Indicator
LED Indicator
Reset Button
Touchscreen
Touchscreen
Fingerprint Reader
Fingerprint Reader
Backup Key
Backup Key
Reset Button
Used to reset the lock to factory default settings.
Add a New User to the Lock
Options 1
Add Device
Step 1. Turn on the GPS and Bluetooth on your
Add through scanning
smart phone
Step 2. Select the device that you want to add in
Latch 5 Fingerprint
the scanning list
Add through categories
Step 3. Adding the device by following the
instructions in the App
Ultraloq Locks
Options 2
Step 1.
Select Latch5 Fingerprint
Step 2.
Select the device with strongest signal strength
Step 3.
Create admin code
Step 4
Name the lock
.
(
NFC card supported
Set three different ways to unlock the
door when add a new user
a. Add Fingerprint
b. Add Code
c. Add the User's Email Account
Please follow more detailed instructions
User List
Add through Scanning
Add through Categories
)
in the App.
Publicidad
