HOMCOM AA1-056 Instrucciones De Montaje página 12

Parent Use and Supervision
THE ELECTRIC SCOOTER PILOT SHOULD NOT EXCEED THE WEIGHT LIMIT OF
50KGS.
This weight does not always mean that a person's size is adequate to fit or maintain control
of the electric scooter.
THE RECOMMENDED AGE OF THE DRIVER IS 7 YEARS OLD OR MORE.
•Any rider who can not fit comfortably on the scooter should not try to ride it. A parent's deci-
sion to allow their child to use the scooter should be based on the child's maturity, ability, and
ability to follow the rules.
•Do not touch the engine or the brakes of the scooter when in use or immediately after use as
these parts can reach very high temperatures.
•Keep this scooter away from small children and remember that it is designed to be used only
by people who feel at least completely competent and comfortable while using this product.
•Check and respect local laws or regulations that may affect where the scooter may be used.
•Always drive defensively. Beware of obstacles that may catch on your wheel and force you
to turn abruptly or lose control. Be careful to avoid pedestrians, other obstacles (such as skat-
ers,scooters, etc.), children or animals that can get in your way. Always respect the rights and
property of others.
•Do not activate the speed control on the handle unless it is on the scooter and in a safe,
outdoor environment that is adequate to withstand the abuse of jumping, skidding or any
other type of misuse or pirouette.
•Hold the handlebars with both hands at all times.
ELECTRIC SCOOTER OPERATION
Ride Operation
•Always wear an approved helmet,eye protection,shoes and for inexperienced riders,we
further recommend gloves,knee and elbow pads.
•Before riding,be sure to have a clear unobstructed level path ahead of the rider.
Step 1:Turn the electric scooter to the "ON" mode with the red ON/OFF Switch located on the
bottom right side of the scooter.
Step 2:Put the Kickstand in the folded position,securely away from the ground.
Step 3:Firmly grab the Handlebars with both hands.Place one foot onto the footplate and go
ahead and push off with the other leg like riding any other foot scooter.
Step 4:Simultaneously,engage the motor by slowly and simply depressing the Accelerator,
located on the right-hand side of the handlebar.You will feel the power of the motor as you
begin to raise the other leg off the ground,then you can speed up.
Step 5:To slow down or complete stop,the rear wheel brake is engaged by depressing the
Handbrake, located on the left hand side of the handlebar. This can be performed by using
four fingers of the left hand with the thumb placed on the handlebar.This is a friction brake.The
harder it is pressed, the more "braking" action will be applied on the rear wheel.This brake has
a micro device that will deactivate the power of the motor simultaneously.As you become a
more skilled rider and familiarize with you new electric scooter,you will begin to use a combi-
nation of brake and power to achieve optimum operation.
Step 6:Turn off the switch when not in use.Be sure to recharge the batteries after using.
12