Maintenance - EdilKamin ELLKAMIN 8 Instalación Uso Y Mantenimiento

MAINTENANCE

Before performing any maintenance, disconnect the ap-
pliance from the mains.
Regular maintenance is required for the insert to function
correctly.
Any problems resulting from lack of maintenance will im-
mediately void the warranty.
DAILY MAINTENANCE
Operations must be performed when the stove is off, cold
1
and unplugged from the power supply
• Cleaning must be carried out with a vacuum cleaner (see
optional extras page 58).
• Open the door, extract the fi rebox (1 - fi g. A) and tip the
2
residue into the ash drawer (2 - fi g. A).
• DO NOT EMPTY THE RESIDUE OUT INTO THE PEL-
LET HOPPER.
• Remove the ash grill (3 – Fig. A), clean any debris clogging
the holes.
2
3
• Pull the ash drawer (2 - fi g. A) out and empty it into a nonfl
ammable container (the ash may still have some parts that are
hot and/or embers).
• Vacuum out the inside of the fi re box, fi re grate, and space
fi g. A
around the fi rebox, into which the ash falls.
• Remove the fi rebox (1 - fi g. A) and remove any encrustation
using the brush provided, clearing any clogging in the holes.
• Vacuum the fi rebox, clean the contact edges between the fi re
box and its seating.
• Clean the glass, if necessary (when cold).
We remind you that using without cleaning the melting pot,
may cause a sudden ignition gas inside the combustion cham-
ber with the consequent breaking of the glass.
5
Never vacuum hot ash, it can make the vacuum cleaner
breakdown and represents a fi re risk.
ATTENTION:
MAKE SURE THE ASH TRAY IS CORRECTLY POSI-
TIONED IN ITS HOUSING
WEEKLY MAINTENANCE
4
• Clean the combustion chamber (with brush).
• Vacuum the hose located near the electrical resistance (4 -
fi g. B).
• Remove the ceiling (5 - fi g. B) and tip the residue into the ash
drawer.
N:B: reposition the ceiling with the arrow pointing out-
fi g. B
wards
• Clean the combustion chamber
- 54
-