Wolf KGXD Instrucciones De Montaje página 42

42
KGXD stacked air routing
(with external bypass)
Secure the side supports of the bypass casing to each other with screws.
Secure cubes together with screws.
Remove the upper support from the KGXD upper part, so that the plate elements can
be installed later.
Only for top TA:
Remove mist eliminators and lower slide-
in rails in KGXD upper part before lifting,
in order to make assembly easier.
Remove mist eliminator panel and pull out
mist eliminators.
Align the KGXD upper part horizontally
and vertically with the lower part and
bypass casing.
Screw casing parts from top to bottom with
supplied M8x120 screws and nuts.
3064441_201802