Norwood LumberPro HD36 Instrucciones Originales página 14

EN–6
LM34-HD-41500-INST (2023-01-24).indd 6 LM34-HD-41500-INST (2023-01-24).indd 6
Install the log turner factory assembled
(item #18 and others) on to the frame
(item #16) with the shaft (item #20).
Secure the shaft (item #20) with two split
collars (item #7), one on each end.
Install the hydraulic cylinder (item #9),
as shown on picture, with the hitch pins
(item #23 & 24), at two lower connection
points.
2023-01-24 9:47:46 AM 2023-01-24 9:47:46 AM