Descargar Imprimir esta página

Rubi DU-200 EVO Instrucciones Originales página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
Use safety gloves
Wear safety glasses
Use hearing protectors
Attention- risk cutting saw
CE Mark
WEEE Compliance
Precautions
WARNING!
Important! When using electrical apparatus, observe the following safety measures in
order to reduce the risk of electric discharge, injuries and fire.
Read and observe all these instructions before using the machine.
KEEP THESE INSTRUCTIONS SOMEWHERE SAFE
Before starting, ensure you use protective gloves , ear protectors and
Although this is a wet saw and little dust is generated during cutting, it is highly recommendable to
wear a protective mask.
Once the job is finished, dispose of dirty water at a public institution of recycling and waste
collection.
Recommended working temperatures should be between 5 and 40° C and between 0.8 and 1.1
bar. (maximum humidity 95%).
WARNING!
Do not use the machine for purposes other than those it is designed for.
WARNING!
This machine should only be used with a continuos rin diamond disc. Do not use this machine
with a segmented or turbo disc.
If the disc is mistakenly mounted and when machine is turned on is running in the opposite
direction, stop the machine and correctly re-mount before commencing any work.
Keep clean the work area
Disordered tables and areas are prone to damage.
Consider the work area environment
Do not expose tools to rain.
Do not use tools in damp or wet places.
Keep the work area well lit.
Do not use tools in the presence of flammable liquids or gases.
To protect against electric shock
Avoid body contact with grounded surfaces or mass (pipes, radiators, stoves, refrigerators).
Keep others away
Do not allow people, especially children , not workers , contact tool or extendable cables and
keep them away from the work area.
Storing the tools are not being used
When not in use, tools should be stored in a dry, locked place out of reach of children.
Do not force tool
ÉThis one will job better and safer at the assigned mode feature which is intended.
Use the correct tool
Do not force a small tool to do the job corresponding to a heavy tool.
Do not use tools for purposes for which they are not intended ; for example , do not use
circular saws to cut tree limbs or logs.
Dress appropriately
Do not use large clothes or jewelry that may be caught by moving parts clothing.
AntiSlip footwear is recommended when working outdoors.
Wear protective hats for long hair.
Use protective equipment
Wear safety glasses.
Use masks to prevent dust if cutting operations can produce.
Connect dust extraction equipment
If devices for connection to dust extraction equipment and collecting equipment are provided,
ensure these are connected and are used properly.
Do not ill-use the cables
Never pull the cord to disconnect it from the conection box. Keep cord away from heat, oil
and sharp edges.
Ensure the work
English
TRANSLATION OF THE ORIGINAL
When possible, use clamps or a vise to hold work. It's safer than using your hand.
Do not extend your range too
Maintain a strong support on the ground and maintain balance at all times.
Maintan tools with care
Keep tools sharp and clean for better and safer performance.
Follow instructions for lubricating and changing accessories.
Periodically review the tool and cables for damage repair through an authorized service.
Examine extension cords periodically and replace if damaged.
Keep dry the handle and grips, clean ,and free of grease and oil.
Disconnect tools
When not in use , disconnect the power tools before repair as accessories such as blades, bits
and cutters are changed.
Remove adjusting keys and wrenches
Getting used to check that adjusting keys are removed from the tool before operating.
Avoiding an unintended start
Ensure that the switch is in "open" position when the tool is plugged.
Be carefull
Look what you doing, use common sense and do not work with the tool when you are tired.
Check damaged parts
Before re- using the tool, it should be carefully checked to determine that it will operate
properly and will be suitable for the role to which it is intended.
Check the alignment and fixing of moving parts, breakage of parts, mounting, and other
conditions that may affect its operation.
A guard or other part that is damaged should be properly repaired or replaced by an
authorized service center, unless otherwise specified in this instruction manual indicated.
Defective switches must be replaced by an authorized service.
Do not use tool if switch does not turn on and off.
The use of any accessory or other supplement recommended in this instruction manual may
create a personal injury risk.
Make the tool service by qualified personnel
goggles.
This power tool complies with the requirements of appropriate security. Repairs should only
be carried out by qualified personnel using original spare parts, otherwise there could be a
significant risk to the user.
Workspace
Workspace
F. GENERAL CHARACTERISTICS
Technical characteristics...................................................................................................................................Pag.40
The overall machine..........................................................................................................................................Pag.40
Accessories.....................................................................................................................................................Pag.40
Decalaration of compliance with eec regulations..........................................................................Pag.44/45
Electric mitring saws for tiles.............................................................................................................Pag.41
Without the previous authorisation of GERMANS BOADA S.A., the partial or total
reproduction of this manual, in any format or by any means or process, is strictly prohibited,
whether such reproduction be mechanical, photographic or electronic.
Any of these activities will incur legal liability and may give rise to penal action being taken.
GERMANS BOADA S. A. reserves the right to make any technical modification without
previous notice.
WARNING!
5.

Publicidad

loading

Este manual también es adecuado para:

Du-200 evo 6505590655907559385598955903 ... Mostrar todo