Publicidad
Idiomas disponibles
Idiomas disponibles
10. Connecting the instrument
E
The instrument can be connected to a peripheral via a inductive, Power (Power-USB). See page 2 for connecting the
Power cable.
Measured values can be transmitted and the instrument driven using predefined commands (see chap. 11 for a list of the
main retro-commands).
Note :
In Tolerance mode, the tolerance limit lights remain lit only for a few seconds while the measurement stabilises. On the
other hand, they will remain lit continuously if the instrument is connected to, and powered by, the Power RS (USB) cable.
17
Publicidad
