Publicidad
Idiomas disponibles
Idiomas disponibles
3. Select a heat setting by touching the slider
control.
• If you don't choose a heat setting within 1
minute, the Induction hob will
automatically switch o . You will
need to start again at step 1.
• You can modify the heat setting at any
time during cooking.
If the display flashes
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display "
" will automatically disappear after 1 minute if no suitable pan is placed on it.
2. Finish Cooking
1. Touching the heating zone selection
control that you wish to switch o .
3. Turn the whole cooktop o by touching
the ON/OFF control.
power up
power down
alternately with the heat setting
2. Turn the cooking zone o by touching the
slider to "0".
Make sure the display shows "0".
4. Beware of hot surfaces
H will show which cooking zone is hot to
touch. It will disappear when the surface
has cooled down to a safe temperature. It
can also be used as an energy saving
function if you want to heat further pans,
use the hotplate that is still hot.
18
Publicidad
