Arcam AV41 Manual página 29

CD Device Mode
The Device Mode button selects as the source.
The button is configured to control the CD functions of
Arcam CD players, although this can be changed (see
"Locking/Unlocking a specific Device Mode" on page EN-23).
Toggles power between standby and on.
2
Open/close disc tray.
1
0...9 Searches for and plays the track corresponding
to the key pressed.
DISP Cycles through the front panel
display's brightness options.
MODE Cycles through the repeat options (track, disc,
etc.).
Fast rewind.
7
Fast forward.
8
Press and release to skip back to the beginning
9
of the current/previous track
Press and release to skip forwards to the
:
beginning of the next track.
Stop playback of a CD
Pause and playback of the current track.
4;
POP UP In 'normal play' (i.e. the display does not show
), press the ' and , keys to
the letter P
select the track and then stores the track.
In 'program play' mode, the key deletes
the stored track.
Navigate setup and CD programme selection
menus.
OK selects the highlighted file or enters the
highlighted menu on the screen – equivalent
to 'Enter' or 'Select' on some remote controls.
' Up
< Left
> Right
, Down
+ ' Power on from Standby
CD
+ , Standby from Power on.
CD
AMP Resets remote to mode.
AMP
RADIO Plays the programmed tracks.
EN-27
EN