Descargar Imprimir esta página

Alessi Plisse MDL08 USA Manual Del Usuario página 16

Publicidad

Idiomas disponibles

Idiomas disponibles

MDL08 "Plissé" Toaster
Designed by Michele De Lucchi in
2020, this toaster is made of thermo-
plastic resin and steel, and has been
tested and certified to guarantee
consumer safety.
DESCRIPTION
OF THE TOASTER
A - Body made of thermoplastic
resin (PP)
B - Power indicator light
C - Adjustment knob
D - Lift mechanism lever
E - Reheat function
F - CANCEL button
G - DEFROST button
H - BAGEL button
I - Crumb tray
L - Rack for sandwiches
(accessory not included)
(fig. 1)
ATTENTION!
• KEEP THE APPLIANCE OUT
OF THE REACH OF CHILDREN.
• Bread may burn, therefore do not
use the toaster near curtains or
other flammable materials.
• ALWAYS SUPERVISE THE
TOASTER WHEN THE POWER
IS ON.
• When the toaster is on and
immediately after use the metal
components near the heating
element, the rack and the
sandwich rack reach very high
temperatures.
NEVER touch them while the
appliance is in operation.
• Do not touch the appliance with
wet hands.
• NEVER put metal objects into
the product.
MDL08 USA Istruzioni.indd 16
MDL08 USA Istruzioni.indd 16
To clean the toaster and to remove
any bread that has become stuck,
unplug the toaster from the mains
and never use metal tools.
• After use, allow the appliance to
cool before covering it or putting
it away.
• Never open the appliance. All
electrical repairs must be done by
authorised personnel.
• Only use Alessi guaranteed spare
parts and accessories.
• THIS PRODUCT IS FOR
HOUSEHOLD USE ONLY.
BEFORE USING
THE TOASTER
• After removing the toaster from its
packing, check that it is in perfect
condition.
• Check to be sure that the
compartments are empty
• Do not toast any bread the first
time you turn it on (see the
paragraph on "Using the toaster"):
the new heating elements may
emit some harmless fumes that
will disappear shortly.
USE OF THE TOASTER
• Place the toaster on a flat surface,
far from any flammable materials.
• Unwind the power cable from the
winder located under the base of
the toaster and adjust the length of
the cable, using the slot to lock it
in place (fig. 2)
• The silicone rubber feet on the
base of the toaster provide the
appliance with greater grip and
stability and make it easier to
unwind the cable
• Insert the plug in the power socket.
16
26/11/20 10:58
26/11/20 10:58

Publicidad

loading