INQUA 1.2 BR027100 Instrucciones De Uso página 49

4.1 Preparing for inhalation
Assembling the nebuliser
If the nebuliser has been dismantled, follow the instructions
below to assemble it for use:
Lug
Slots for
the lugs
Twist the nebuliser upper part clockwise while pressing gently to
engage the lugs on the nebuliser upper part in the slots in the
nebuliser lower part. The two nebuliser parts will be attached
securely by gently twisting clockwise.
Note that the nebuliser upper
part (1a) and the nebuliser
lower part (1b) are attached to
each other by a "bayonet"
1a
closure.

Insert the nebuliser upper
section carefully in the nebu-
liser lower section.

Pay particular attention to
front
the note in the front of the
drawing.
The lugs in the nebuliser
upper part are different sizes
and only fit in the different
1b sized slots in the nebuliser
lower part in a certain
direction.
en
49