Publicidad
Idiomas disponibles
Idiomas disponibles
microorganisms. When cleaning, any build-up, deposits or film of
dirt that has formed on the surfaces of the tank or internal surfaces
must be removed. All surfaces must be wiped dry.
Misuse may result in injuries.
Please observe chapters "Filling the water tank" and "Cleaning
and care".
DANGER for children!
Packing materials are not children's
toys. Children should not be allowed to
play with the plastic bags. There is a
risk of suffocation.
Keep the device out of the reach of chil-
dren.
DANGER to and from pets
and livestock!
Electrical devices can represent a dan-
ger to pets and livestock. In addition,
animals can also cause damage to the
device. For this reason you should keep
animals away from electrical devices at
all times.
DANGER! Risk of electric
shock due to moisture!
The device, the mains power cable and
the power supply unit must not be im-
mersed in water or other liquids.
Protect the device from moisture, water
drops and water splashes: failure to ob-
serve this instruction may result in an
electric shock hazard.
If liquid gets into the device, immediate-
ly disconnect the power supply unit.
Have the device checked before reus-
ing.
Never touch the device with wet hands.
If the device has fallen into water, pull
out the power supply unit immediately,
and only then remove the device from
the water. Do not use the device again,
and have it checked by a specialist
workshop.
24 GB
Unplug the power supply unit before fill-
ing the water tank and before cleaning.
Fill the water tank at most up to the
MAX marking. Dry the outside of the
water tank before inserting it back into
the device.
Carefully insert the filled water tank into
the device while ensuring that no water
splashes out.
Move the device carefully with the filled
water tank inserted.
DANGER! Risk of electric
shock!
Do not operate the device if there is visi-
ble damage to the device, the power
supply unit or the mains power cable,
or if the device has previously been
dropped.
Only connect the power supply unit to a
properly installed and easily accessible
wall socket, whose voltage corre-
sponds to the specifications on the rat-
ing plate. The wall socket must still be
easily accessible after the device is
plugged in.
Ensure that the mains power cable can-
not be damaged by sharp edges or hot
points.
When using the device, ensure that the
mains power cable cannot be trapped
or crushed.
Even after it has been switched off, the
device is not completely disconnected
from the mains power supply. In order
to fully disconnect it, pull out the power
supply unit.
Publicidad
