Publicidad
Idiomas disponibles
Idiomas disponibles
tal indicates to do so. Using
the AeroGuard Dust Sensor
cartridge for longer than the
indicated lifespan may result
in inaccurate readings. Make
sure your system is up-to-
date by leaving the AeroGuard
connected to the internet. The
AeroGuard will install firmware
updates automatically in the
background, issuing a restart
indicated during which (less
than a minute) the AeroGuard
is not usable nor is the LED-
ring representing the current
air quality. Relays being in
use during a firmware update
reboot may be temporarily
inactive.
Update the AeroGuard appli-
cation on your iOS or Android
device whenever an update is
4� Technical Specifications
Specifications
Dimensions
Material of housing
Weight
Replaceable Dust Sensor
Power consumption
Altitude
Overvoltage category
EN - 4
available.
Only store and use the
AeroGuard in environments
within its rated ambient condi-
tions of -10 °C (14 °F) and 40
°C (104 °F) and 90% relative
humidity. Do not expose the
AeroGuard to direct sunlight.
Every month, make sure all
openings are clean and clear of
obstructions. Clean the out-
er shell with a damp cleaning
cloth with a mild soap. Test
on a small area first. Note:
Sensor measurements could
temporarily be affected by the
soap and humidity. Make sure
no moisture gets inside of any
openings or ports. Check the
power adapter and optional
relay wires for damage, replace
if necessary.
130 x 130 x 215 mm (LxWxH)
(5.1 x 5.1 x 8.5 in)
PC/ABS
0.9 kg (2 lbs)
Includes laser:
• 660 nm wavelength
• DIN EN 60825-1 Class 1
Max. 10.5 W (5 V DC, 2.1 A)
2000 m
OVC II
Publicidad
