Dantherm MCS Master DHP 65 Manual De Instrucciones página 12

en
1... INTRODUCTION
it
2... GENERAL DESCRIPTION OF THE UNIT
de
3... PRELIMINARY OPERATIONS
4... START-UP
es
5... MAINTENANCE
fr
6... ALARM LIST
nl
pt
►►►1. INTRODUCTION
da
fi
►►1.1. INTRODUCTION
The manual is intended for the end user only in
no
regard to operations that can be performed with
sv closed panels. The operations, other than clean-
ing of the finned coil, that require to open doors or
pl
panels with tools must only be performed by ex-
pert personnel. Each appliance must be connect-
ru
ed to the power supply via a cable with a power
plug supplied with the unit. For maintenance op-
cs
erations, the power plug must always be discon-
hu
nected to allow the operator to intervene in safe
conditions.
sl
If assistance or spare parts are required, read the
identification plate located outside of the unit to
tr
identify the appliance (model and serial number).
hr
lt
►►1.2. GENERAL SAFETY RULES
The purpose of the manual and of the entire doc-
lv
umentation supplied is to allow both the installer
et and operator to correctly perform the installation,
start-up and maintenance of the equipment, with-
ro
out causing damage to the personnel in charge
and to the unit.
sk
Each appliance is subject to a risk assessment
carried out in compliance with current legisla-
bg
tion, which defines the necessary actions and
uk
implements the protective measures required to
achieve the risk reduction objectives.
bs
All activities regarding the operation and mainte-
nance of the unit must be performed:
el
►Only by properly trained people, who must im-
zh
plement safe working practices and use the per-
sonal protective equipment appropriate to the
specific task performed, based on their specific
qualification.
► Only by properly trained people who have read
and fully understood the manuals, technical
documents and safety documents.
►Use of the appliance must not be allowed to an-
yone who is not adequately trained and skilled.
INDEX INDEX
This manual, the technical documents and any
security documents attached must be read and
stored for the entire lifespan of the appliance:
CAUTION: This appliance is designed for
use in an indoor environment.
CAUTION: The unit must be connected to
an electrical system that complies with local
electrical safety regulations.
CAUTION: The unit must be placed by fol-
lowing the dimensions and spaces required,
including the minimum spaces allowed by ad-
jacent structures.
CAUTION: This equipment must always be
connected to earth. We decline any liability for
any danger or damage caused if this require-
ment is not complied with.
CAUTION: Sharp tools (screwdrivers, nee-
dles or the like) must not be inserted into the
grids or inside any other panel opening, es-
pecially when the unit is open to remove the
filter.
CAUTION: All maintenance and cleaning
operations on the unit must be performed with
the power supply disconnected. Never remove
the front grille or open any part of the unit
without first disconnecting the plug from the
socket.
CAUTION: Use a wet cloth to clean the unit.
Never spray water on the unit and its electrical
components except to clean the finned coil.
The equipment must always be kept in a vertical
position in order to prevent accidental spillage of
condensation (water) from the specific container.
It is strictly forbidden to move the equipment while
connected to the power outlet, as the resulting vi-
brations and movements may cause the conden-
sation to leak from the specific container, thus af-
fecting the electrical parts.