Publicidad
Idiomas disponibles
Idiomas disponibles
Always follow all safety precautions when performing maintenance to
the carpet cleaner.
WARNING
Electrical Shock and Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the carpet
cleaner. Failure to do so could result in electrical shock or personal
injury from carpet cleaner suddenly starting.
CARPET CLEANER INTERIOR CLEANING
1. Turn off and unplug carpet
cleaner. Fill the clean water
tank with warm tap water and
then empty it all to rinse. Then
fill again with warm tap water.
Reinstall the clean water tank
to the unit.
2. To flush and rinse the carpet
cleaner, turn on the unit and
press the spray trigger for 15
seconds while making back
and forth passes on a section
of carpet.
3. Release the spray trigger and
vacuum up the water.
CLEANING EXTERIOR AND ATTACHMENTS
1. Turn off and unplug carpet
cleaner. DO NOT drip water on
carpet cleaner.
2. To clean exterior, or to reduce
static electricity and dust build-
up, wipe outer surface with a
clean, soft cloth that has been
MAINTENANCE AND CARE
4. Empty the dirty water tank.
dipped in a solution of mild
liquid detergent and water,
then wrung dry. Wipe dry after
cleaning.
NOTE:
Wash attachments in
warm soapy water, rinse and air
dry. Do not clean in dishwasher.
- 18 -
Publicidad
