STEP 5 Position the drain hose
The drain hose can be positioned in three ways:
U-PJT_WASHER-MD_SimpleUX_DC68-04322L-00_EN.indd 25
U-PJT_WASHER-MD_SimpleUX_DC68-04322L-00_EN.indd 25
Over the edge of a wash basin
The drain hose must be placed between 60 cm and 90
cm (*) above from the floor. To keep the spout of the
drain hose bent, use the supplied plastic hose guide
(A). Secure the guide to the wall using a hook to ensure
A
stable drainage.
In a drain pipe
The drain pipe should be between 60 cm and 90 cm high
(*). It is advisable to use a 65 cm high vertical pipe.
• To ensure the drain hose stays in position, use the
plastic hose guide provided (see the figure).
• To prevent the siphoning of water flow during
drainage, make sure to insert the drain hose 15 cm in
the drain pipe.
• To prevent the drain hose from moving around,
secure the hose guide to the wall.
Drain standpipe requirements:
• Minimum diameter of 5 cm
• Minimum carry-away capacity of 60 litres per minute
English 25
2024/1/2 11:48:18
2024/1/2 11:48:18