Publicidad
Idiomas disponibles
Idiomas disponibles
The lock icon ( )
EN
To cancel this function, press the standby button button ( )
twice consecutively.
2.2.3
Straightening your hair
1. Properly prepare your hair and set up the product (see the
previous chapters).
2. Take a hair section and pull it taut by holding its end tightly
between your index and middle fingers of the hand that is not
holding the product.
3. Clamp the hair section near the root by pressing the heating
plates
4. Gently glide the heating plates downwards from the root to
the tip of the hair section (see Fig. B).
The infrared outlet
activated. The ion icon
The infrared light enables deeper and even heat penetration
and repairs hair scales by locking in your hair's natural moisture
to prevent overdrying.
The negative ions seal the hair cuticles and help to reduce frizz
and splitting.
5. Proceed in the same way for every hair section.
2.2.4
After use
1. When done, press and hold the standby button ( )
turn off the product.
The product remembers the last operating temperature for
next use.
The product also automatically turns itself off after 45 minutes
without pressing any buttons. This is a safety feature and is not
intended to be a replacement for the standby button ( ).
2. Unplug the product and place it on a heat-resistant surface to
allow it to completely cool down before cleaning or storage.
3 USER-MAINTENANCE
INSTRUCTIONS
The appliance is virtually maintenance-free. No lubrication is
needed. Keep heated surfaces clean and free of dust, dirt, and
hair spray. If cleaning becomes necessary, unplug the appliance
from the power source and wipe the exterior with a damp cloth.
If the cord becomes twisted, untwist prior to use.
9
shows when this function is activated.
11
together.
1
7
and ion generator
in the display
13
are also
8
illuminates.
9
to
3
Publicidad
