Eaton TRIPP LITE Serie Manual Del Usuario página 3

1. Closure Assembly
2
Remove the nut component from the pass-through cable entry (Figure 1-3).
Note: The cable entry is suitable for uncut cable or branching cable.
3
Loosen the two screws of the nut component, then open the nut component
(Figure 1-4).
04-067-93-47C2_revA.indb 3 04-067-93-47C2_revA.indb 3
Figure 1-3: Put down the nut component
Figure 1-4: Open the nut component
3
1/31/2024 10:40:52 AM 1/31/2024 10:40:52 AM