Publicidad
Idiomas disponibles
Idiomas disponibles
AUTO mode
Press the "mode"-button and select the "auto" mode. Press the arrow buttons to set the
temperature. Press the "on/off" button to turn the air conditioning on.
ATTENTION: when selecting the "auto" function, the air conditioning will determine in which
setting it will work (air conditioning – fan – dry), depending on the room temperature.
COOL mode
Press the "mode" button and select desired function. Press the arrow buttons to select the
desired temperature. Press the "fan" button to select the fan speed. Press the "on/off" button to
turn on the air conditioning.
DRY-mode
Press the "mode" button to select the "dry" function. Use the arrow buttons to set the desired
temperature. Press the "on/off" button to turn on the air conditioning.
FAN-mode
Press the "mode" button and select desired function. Press the "fan speed" button to select the
fan speed. Press the "on/off" button to turn on the air conditioning.
ATTENTION: this function allows you to use the unit as a fan, which means the temperature
cannot be set. No temperature will be displayed on the remote control.
FAN button
FAN
When pressing this button you can select the desired fan speed: auto, low
.
SHORTCUT button
SHORT
CUT
With this button you can set and switch on a preferential setting.
If you use a certain setting more often, you can set this by pressing the SHORTCUT button for
three seconds. The appliance then remembers the settings that are switched on at the moment of
pressing. These settings can include: the user setting (MODE), set temperature, ventilation speed
(FAN) and possibly also the SLEEP setting.
The moment you press the SHORTCUT button, the appliance will work at the previously determined
settings. If you push the shortcut button, the first time after you've connected the appliance, the
system will be automatically in auto-function. This means 26° and the fan-speed is auto.
TIMER ON button
TIMER
ON
Use this button if you want the air conditioning to start working at a certain time. Every press of
this button will elevate the current time. The max. timer setting is 24 hours. For cancelling the auto
on function you keep on pressing the "timer on" button until "0.0" is displayed.
ATTENTION: pressing the ON/OFF button on the remote control will cancel all timers.
• Press the "timer on"button. The display will show the last setting of the "timer on" mode.
• Press the "timer on" button again to start setting the delay time you want the air conditioning
to start working. Every time you press the timer the delay time will change. Max. delay timer
setting is 24 hours.
• After setting the timer, it takes about 2 sec. before the set temperature will be displayed again.
www.domo-elektro.be
, med
, high
79
Publicidad
