Publicidad
Idiomas disponibles
Idiomas disponibles
TIMER OFF – touch
TIMER
OFF
Press this button if you want your air conditioning to shut down at a certain time. You can elevate
the current time every time you press the button. Max timer setting is 24 hours. For cancelling the
auto on function you keep on pressing the "timer on" button until "0.0" is displayed.
ATTENTION: pressing the ON/OFF button on the remote control will cancel all timers.
• Press the "timer off"button. The display will show the last setting of the "timer off" mode.
• Press the "timer off" button again to start setting the delay time you want the air conditioning
to stop working. Every time you press the timer the delay time will change. Max to set delay
time is 24 hours.
• After setting the timer, it takes about 2 sec. before the set temperature will be displayed again.
Timer on + Timer off
You can also switch on both functions simultaneously. This determines when you switch on the
appliance, but also when the appliance switches off.
ATTENTION: the set time is always counted from the hour of programming. For example: it is 1 pm.
You want the appliance to work from 4:30 to 6 pm. Set the TIMER ON on 3.5 h and TIMER OFF on
5.0 h.
SLEEP button
SLEEP
This setting can be used during the night. It will keep a comfortable sleeping temperature and
will save energy. This function can be selected with the "cool" and "auto" setting. The
appears on the display Cancel this setting by pressing the "on/off", fan, sleep or mode button.
When pressing the "sleep" button, the selected temperature will be elevated with 1 °C after 30
min. After another 30 min the temperature will increase with another 1°C. The air conditioning
will maintain this temperature for 7 hours. After this time, the air conditioning will go back to the
original set temperature and the "sleep" function will end.
ATTENTION : this function cannot be selected with the "fan" or "dry" function.
SWING button
SWING
This button activates the automatic movement of the lid at the top, which will constantly change
the airflow due to oscillation.
FOLLOW ME button
FOLLOW
ME
With the "follow me" function, the ambient temperature is measured by the remote control instead
of by the unit.
• Place the remote control where you want the set temperature to reach. This function ensures
the optimum temperature when using the 'auto' and 'cool' settings.
• Press the 'follow me' button to activate the function. The remote control will send a signal to
the air conditioner every 3 minutes. The symbol
• Press the button again to cancel the function.
LED button
LED
Press this button to turn off all the indicator lights on the display, e.g. when using the device at
night. Press the button again to turn the display back on.
80
appears on the display.
www.domo-elektro.be
symbol
Publicidad
