Publicidad
Idiomas disponibles
Idiomas disponibles
POSSIBLE PROBLEMS AND THEIR SOLUTIONS
PROBLEMS
The appliance isn't working when pressing the
on/off touch.
The room is not cool enough.
The appliance is making too much noise or is
causing vibrations.
Your appliance makes a gurgling sound.
The display shows error message 'P1'.
The display shows an E error message.
SOLUTIONS
• The error code P1 is displayed , drain the
water from the air conditioning.
• The room temperature is lower than the
selected temperature. Adjust the selected
temperature.
• The windows and doors aren't closed.
Make sure all windows and doors are
closed.
• There are heat sources in the room.
Remove all heat sources if possible.
• The air outlet hose is not connected or
blocked. Attach the hose and check if there
is no blockage.
• The selected temperature is too high.
Adjust the selected temperature.
• The floor is not level or flat. Place the
appliance on the flat and level surface if
possible.
• The air filters are dirty. Clean the filters.
• The sound is produced by the refrigerant in
your appliance, this is normal.
• The drainage container is full. To empty
the container, follow the instructions under
'Drainage in case of P1 code'.
• Contact DOMO customer service or the
customer service department of the shop
where you bought the device for an
inspection and possible repair.
www.domo-elektro.be
83
Publicidad
